360 degree rotation mechanism
CUT Multi Crushers are equipped with the ability to rotate 360 degrees. Okada ARTS rotator is standard for CUT50 and 80 and Okada HR rotator is standard on CUT30 and 100. Free rotation (FR) is optional for CUT30 and 100.
Indexable cutter blade
Rebar and structural steel such as I beam can be processed. The blade is made of tough hardened steel and indexable for longer lasting performance.
Heavy duty structure
The frame and crushing jaws are produced utilizing a special alloy cast iron as one piece. There are no welds in main structure. Thanks to the casting, there is unmatched power compared to fabricated structures.
Heavy duty bearing
Extremely heavy duty bearings in the rotating joint give unmatched durability, and never need adjustment.
Frame pin adjustment
The exclusive frame pin adjustment mechanism ensures proper clearance, which is critical for clean cut.
Crushing wedget
Okada original crushing wedge penetrates and cracks the concrete to be processed. The wedge is re-buildable.
Speed valve
Okada speed valve utilizes the return oil out of the hydraulic cylinders to greatly increase cycle speed of the crusher and is standard on CUT Multi Crushers.
Pressure relief valve CUT30&50
A standard built-in pressure relief valve protects from overload.
| CUT30 | CUT50 | CUT80 | CUT100 | ||
|---|---|---|---|---|---|
| Operating weight | lbs | 1570 | 2590 | 4730 | 6820 |
| Overall length | inches | 66 | 80 | 101 | 113 |
| Overall height | inches | 41 | 52 | 67 | 74 |
| Maximum jaw opening | inches | 20.7 | 23.9 | 33.5 | 40.5 |
| Cutter blade length | inches | 11.8 | 13.4 | 19.7 | 22.8 |
| Cylinder force | US tons | 66 | 94 | 151 | 189 |
| Cutting capacity |
inches | 1.0x5pcs | 1.0x10pcs | 1.2x16pcs | 1.2x20pcs |
| inches | H5x2.5 | H8x8 | H17.8x7.9 | H19.6x7.8 | |
| Carrier weight range | US tons | 6.6-9.9 | 11-17.6 | 20-25.5 | 30-50 |
| Carrier pressure set at | psi | 3500 | 4000 | 4500 | 4500 |
| Recommended oil flow | gpm | 32 | 53 | 105 | 105 |
| Oil flow range | gpm | 16-35 | 26-63 | 44-116 | 57-116 |
Above specifications assume the use of an Okada Universal pin mount
Rotation system used: CUT50/80=ARTS, CUT30/100=HR.
Specifications are subject to change without prior notice.
