CUT30, CUT50, CUT80, CUT100
Steel Cutting & Primary Breaking Crusher




Features

The Okada CUT demolition attachment is designed to shear structural steel, i-beams, square pipes, etc. and to tear down reinforced concrete with rebar at the demolition site, without replacing the jaw. This lightweight, versatile, powerful and proven tool is backed by more than 10 years in the field.

Because this type of equipment has concrete cracking wedges on the jaw ends and steel cutting blades in the center at the pivot of the jaws, it can be used for both primary concrete breaking and also steel cutting. The system is normally equipped with a 360o rotational mechanism. While it is very versatile, the steel cutting capabilities are generally smaller than exclusive steel cutters.


Applications
Due to its versatility, this type of crusher is becoming increasingly popular. In addition to uses as a primary concrete breaking and steel cutting application, this type of crusher is ideal for handling materials such as steel frames covered with concrete and demolishing concrete steel frame buildings.
CUT80 on a super-long boom configuration being used to tear down a concrete structure reinforced with rebar, beams and post.

CUT100HR in bridge demolition CUT100HR shearing I-beam steel









CUT30 CUT50 CUT80 CUT100
Operating weight lbs 1532 2712 4674 6724
Overall length --1 inch 64.3 75.8 101.5 113
Overall height --2 inch 41 52 67 74
Frame unit width --3 inch 12 15 18 19
Max. jaw opening --4 inch 20.7 23.9 33.5 40.5
Cutter blade length inch 11.8 13.4 19.7 22.8
Cylinder force US ton 66 94 151 189
Cutting capacity
 inch 1.0x5 pcs. φ1×10 pcs. φ1.2×16 pcs. φ1.2×20 pcs.
inch H5×2-1/2 H8×8 H17-3/4×7-7/8 H19-5/8×7-7/8
Operating pressure psi 3500 4000 4000 4500
Carrier weight lbs 13200-19800 22000-35300 40000-51000 60000-100000
Specifications above are subject to change without prior notice